Installation Guide
Thank you for choosing our hooks. These tips show you how to prepare the surface – for a long-lasting, powerful hold.
Clean the surface
Clean the surface thoroughly to remove dirt, grease, moisture or dust. After using a cleaning agent, wipe the area with water to remove any residue, and make sure the surface is completely dry.
Peel off the backing
Peel off the protective backing from the adhesive pad.
Press firmly
Press the hook firmly onto the surface, applying pressure on both sides for a few seconds. The pressure applied during installation greatly affects the adhesive strength.
Wait 24 hours
For best results, wait 24 hours before hanging anything on the hook, so the adhesive can fully bond with the surface.
Removing the hook: Use a flat tool (like a large flathead screwdriver or a spoon) to carefully pry the hook off the wall. Any adhesive residue can be easily cleaned.
Any questions? Contact us at service@dekazia.de – we usually reply within a few hours, at the latest within 24 hours.